To make sure the artwork you provide will achieve the dynamic results you want when your artwork is printed on the items.We require the high resolution(vector) digital artwork..
1.E-mailed artwork
If you send us the artwork via Email,Make sure provide all of the basic elements,including fonts,layers and paths.
File suffixes requirement
.ai
.pdf
.eps
2.Disk format artwork
When providing your artwork on disk,it is best to use a standard disk formats.So that we could open it our side.
3.Original proofing
If possible,you'd better supply us both Disk format artwork & Original proofing.
If you want to customise your items,Below maybe will help you
Paper boxes information
Paper bags information(128gsm art paper)
|
TYPE |
SIZE(CM) |
PCS/CTN |
MEASURE(CM) |
G.W./CTN |
40"HQ(PCS) |
|
Extra L |
33x45x10 |
216 |
49X37X38 |
24 |
213408 |
|
L |
26x32x9 |
288 |
56X37X30 |
23.5 |
315072 |
|
M |
18X23X10 |
432 |
40X27X48 |
20.5 |
566784 |
|
S |
11X14X6.5 |
576 |
35X26X35 |
13 |
1229760 |
|
Wine bottle |
12X33X10 |
432 |
28X37X48 |
19 |
590976 |
Standard bag layout
H = Height, W = Width, G = Gusset are designed according to customers' requirements.
X' shall be folded inside and the enforcement board which is approximately 350gsm for enhancing the support of strings shall be glued on it to form the ear base area of the bag.
'Y' is the base of the paperbag. A 350gsm boxboard will be glued on this area for base enhancement. The value of 'Y' shall be calculated at 0.7*G and it may vary at certain circumstances.
Z' is the gluing area for joining the paper bag. It is usually with the size of 20mm.
a1 + b1 + c1 + d1 are optional printing areas
a2 + b2 + c2 + d2 are recommended printing areas
a3 + b3 + c3 + d3 are the base and optional printing areas
a* and c* are the gusset
b* and d* are the front and back of paper bag
e* is the gluing area. (Nothing can be seen here)
There should be a 6mm bleeding area as shown on the red highlighted area. |
